Maple California Beach Board
These are by far our most popular charcuterie boards we make! This one is made out of maple hardwood. Size is 23.5" (length widest point) x 7.5" (width widest point) x .75" (thickness) - please note each one may vary slightly in size by 1/8". Epoxy is only on the front side of this board.
We first hand select the wood, then program our CNC to cut each piece individually, we then do a light sand before we do our first epoxy pour. Once the pour is completed, we wait at least 72 hours before we do anything further. Some boards may need a second coat, but others look so amazing with just one, we leave them alone. After the last bit of sanding is done, we use several coats of food grade mineral oil for the final step before they are ready for their new homes.
The epoxy areas of any of our boards are used for serving only, do not cut or put anything hot on this part as it will surely ruin the board. We also don't pour epoxy on the back of any of our boards so you can use the whole surface for cutting or prepping food, if you prefer.
Continued care of our boards is easy! Just use food grade cutting board oil every few weeks to keep your board smooth and soft.
Due to natural characteristics of wood and epoxy, actual product images may vary slightly compared to in person.
Helpful tips for your resin piece:
Please do not put your cutting board in the dishwasher.
Please do not rub any abrasive materials on your epoxy resin.
Please do not place any hot pots or plates onto your resin.
Please do not cut on top of your resin.
To clean the resin portion of your board just use a diluted glass cleaning solution and then buff dry.
Use cutting board oil on wood portions after 3-4 uses to keep it from drying out and warping.
Thoroughly dry then stand on end. Never lay piece flat on counter.